<object id="gk8fw"><ruby id="gk8fw"><xmp id="gk8fw"></xmp></ruby></object>

        1. <object id="gk8fw"></object>
        2. 1121及2206(立跟鞋料)說明書


          德州市鑫華潤科技股份有限公司A/B料產品說明書???DeZhouXinHuaRunTechnologyCO.,LTD.??A/BShoeMaterialsProductManuals1.特點(Feature):女式立跟棉鞋底用料(Polyesterpolyolforhighheelscottonshoessoles)2.原液特性:TypicalpropertiesofPUresin:品名Nameo

          所屬分類:

          鞋底原材料

          關鍵詞:

          聯系電話

          1121及2206(立跟鞋料)說明書詳情


               德州市鑫華潤科技股份有限公司A/B料產品說明書
              De Zhou Xin HuaRun Technology CO., LTD.
            A/B Shoe Materials Product Manuals

          1.特點(Feature :女式立跟棉鞋底用料(Polyester polyol for high heels cotton shoes soles
          2.原液特性: Typical properties of PU resin:

          品名
          Name of products

          外觀
          Appearance
          (40)

          粘度
          Viscosity
          (mPas/40)

          密度
          Density
          (g/cm3/40)

          包裝
          Package
          (kg)

          保質期
          Shelf life
          (month)

          貯存溫度
          Storage temperature
          ()

          HR-P-1121

          液狀
          Liquid

          2000±300

          1.2±0.02

          18 (Net)
          藍標簽
          Blue label

          6

          20~25

          HR-I-2206

          液狀或蠟狀Liquid or waxy

          200±50

          1.20±0.02

          20 (Net)
          黃標簽
          Yellow label

          3

          20~25

          3.催化劑與輔助劑Catalyst & Additives:
          催化劑HR-C-3的加入量為:250±10g/18kg,水的加入量為:50-80g/18kg
          The adding amount of HR-C-3 should be 250±10g/18kg, the adding amount of water should be 50-80g/18kg.
          4.成型條件及物性值:Typical processing parameters & Typical Properties:

          反應性
          Reaction
          characteristics

          技術參數
          Technical
          parameters

          項目
          Items

          物性值
          Physical
          properties

          參考配比
          A+C/B Mix ratio (By Weight)

          100/110-115

          成型密度(g/m3
          Molded density (g/m3)

          0.5-0.6

          使用溫度(℃)
          Material Temperature (℃)

          38-42/38-42

          硬度
          Hardness

          A型Asker A

          85-90

          C型Asker C

           

          乳白時間(s)
          Cream time (s)

          4-6

          拉伸強度(MPa)
          Tensile strength (MPa)

          ≥5.0

          升起時間(s)
          Rise time (s)

          30-35

          伸長率(%)
          Elongation (%)

          ≥400

          自由泡密度(g/m3)
          Free rise foam density (g/m3)

          0.25-0.28

          撕裂強度(直角)(kN/m)
          Tear strength (right angle) (kN/m)

          ≥7.0

          金屬模具溫度(℃)
          Mold temperature (℃)

          45-55

          耐折性(零下10℃×10萬次)
          Folding endurance (Minus 10℃×10 million times)

          無裂紋

          脫模時間(min)
          Demould time (min)

          4-6

          DIN耐磨
          DIN abrasion resistance

          ≤200

          • 配合比率是以最佳配比值為基礎,此配比值會隨添加的顏料助劑種類和添加量不同而變化。The mixing ratio is based on the best proportion, this ratio will be changed with the kind of dye and its adding amount.
          • 自由泡沫密度會依季節(溫度,濕度)的不同而變化。Free rise density may vary with temperature & humidity.
          • 該物性數據是對6mm厚的試驗片測試獲得的數據。These physical data are acquired by testing a sample of 6mm thick.
          • 以上數據僅供參考,具體數據以實際操作為準,如需其他物性指標,請與我公司聯系。Data listed above are just for reference.  The detail data are subject to practice operation. If other physical properties are required, please contact us.

          相關產品

          產品留言

          国产精品毛片完整版视频_无码视频一区二区_日本一区二区在线_亚洲欧洲国产精品无码一区二区